APR B8 S5 4.2L FSI V8 Stage III+ TVS1740 Supercharger System

In the factory form, Audi’s S5 4.2L FSI V8 leaves much to be desired compared to recent models proudly displaying the S badge. The APR Stage III+ TVS1740 Supercharger System fills the void by adding an average of roughly 45% more horsepower and torque across the entire power band. The results are nothing short of amazing; taking the S5 from 353 horsepower to 589 horsepower on pump fuel and 635 on race fuel without breaking a sweat! With up to 542 FT-LBS on tap thanks to the TVS1740’s positive displacement supercharger, expect instant acceleration with absolutely no lag commonly associated with other forms of forced induction.

Supercharger and Manifold

At the heart of the APR Stage III+ Supercharger System is Eaton’s latest Twin Vortices Series (TVS) supercharger unit, the TVS1740. The supercharger system is a positive displacement, roots style pump, utilizing Eaton’s lightweight, four-lobe 160 degree twisted rotors. Cast and assembled as a single, OEM-style-manifold and rotating group housing, the unit is quiet, compact, attractive, easy to install, and requires little to no extra maintenance to the unit itself.

The positive displacement supercharger offers power instantly as the throttle is pressed. Boost pressure builds with no perceived lag commonly associated with other types of forced induction, and provides a large increase in torque across the entire power band. Throttle control is linear and predictable and makes for an excellent driving experience both in daily driving and wide-open acceleration.

Since the supercharger does not compress air as it moves through the roots, it’s extremely efficient during light throttle and cruising situations. Unlike screw-type positive displacement superchargers that are always compressing, the TVS unit can internally bypass unwanted air, resulting in negligible parasitic loss during cruising and thus far greater fuel economy.

The single cast unit and appropriately sized rotating group eliminates potential leak points and allows for a slim, compact design without sacrificing key airflow design characteristics. The unit features a high velocity flow path through the supercharger rotors and an unrestricted discharge port into the appropriately sized plenum. The large plenum equalizes flow across all ports as air feeds evenly through the low-pressure-drop, dual-internal air-to-water heat exchangers. Finally, the ports are separated into individual runners, offering greater operation by eliminating cross talk.

Internally the dual heat exchangers offer technological advances shared by Formula 1 teams around the globe. Each unit features a louvered fin design, which minimizes pressure drop while achieving excellent cooling effectiveness. The extruded multi-rib tubing maximizes heat extraction to be carried away through the large bore coolant recirculation hard lines. Externally, supercharger coolant is pumped through a large front mounted heat exchanger where it’s cooled and circulated back through the charger again.

Requirements and Recommendations (Each Sold Separately)

• APR High Pressure Fuel Pumps
  The APR HPFPs expands the 4.2L FSI V8’s direct injection fueling capabilities to the levels required for proper operation with the APR Stage III+ TVS1740 System. Because the pumps are sold in two different forms, they are offered separately from the kit. Entirely new pumps can be purchased, or the vehicle’s existing pumps can be sent to APR for a rebuild at a discounted rate. This product is required. Product Page: APR HPFP.
• Transmission
  The APR Supercharger System greatly increases torque over the factory output levels and as such, an upgraded clutch may be necessary to transmit power to the ground. APR highly recommends upgrading the factory clutch to one that suits the operator’s intended driving style. APR currently does not provide technical support for vehicles equipped with the Tiptronic transmission.
• Induction System
  The APR Supercharger System was designed using the APR Carbonio Intake System and recommends it for optimal performance. An intake port carbon cleaning is necessary to meet advertised power levels.
• Exhaust System
  The APR Supercharger System was designed for operation with the either the factory exhaust system or a high flow exhaust system. APR recommends the APR RSC Catback Exhaust System optimal performance.
• Motul Fluids and Lubricants
  Maintaining the vehicle’s fluids and lubricants is necessary. APR highly recommends Motul’s product range. Product Page: Motul